This premium brass stock sheet offers exceptional dimensional stability and workability. Its robust nature makes it ideal for custom tooling, precision jigs, and as a reliable base for inspection fixtures.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.234" |
| Length | 18" |
| Width | 14" |
Engineered for reliability and performance, this brass stock sheet boasts a precise thickness of 0.234 inches, a length of 18 inches, and a width of 14 inches. Crafted from high-grade brass, it exhibits excellent machinability, corrosion resistance, and a stable coefficient of thermal expansion, making it a superior choice for applications demanding accuracy and longevity. Its inherent non-magnetic properties further enhance its suitability for sensitive measuring and inspection environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work surface is clean and level. 2. Carefully position the brass sheet according to design requirements. 3. Secure the sheet using appropriate fastening methods, such as screws or clamps, ensuring minimal stress.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, causing distortion. | Use hand-tightening initially, then gradually snug fasteners to avoid warping the sheet. |
| Using incompatible adhesives or lubricants during machining. | Consult brass machining guidelines for appropriate cutting fluids and adhesives to prevent surface damage or poor adhesion. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom Measuring Jigs & Fixtures, Precision Tooling Components, Gauges and Templates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||