This high-grade carbon steel stock sheet is engineered for lubricating applications. Its robust 0.231" thickness and precise dimensions ensure reliable performance in demanding industrial environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.231" |
| Length | 24" |
| Width | 13" |
Precision-manufactured to tight tolerances, this carbon steel stock sheet offers superior durability and consistent performance. With a thickness of 0.231 inches, a length of 24 inches, and a width of 13 inches, it is fabricated from high-quality carbon steel, selected for its inherent strength, machinability, and compatibility with lubricating media. This material grade is specifically chosen to minimize friction and wear in moving parts, making it ideal for use in bearings, bushings, and other components requiring reduced surface resistance. Its dimensional stability ensures a precise fit within assembled mechanisms, contributing to overall operational efficiency and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Apply a suitable lubricant to the stock sheet surface. 3. Install the sheet into the intended component, verifying proper fit and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the incorrect lubricant for the carbon steel grade. | Consult the specific lubricant manufacturer's recommendations for compatibility with carbon steel to prevent corrosion or degradation. |
| Failing to deburr edges after cutting or shaping. | Always deburr all cut edges thoroughly to prevent material transfer and potential damage to mating components or personnel. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Bearing surfaces, Wear plates, Guide rails, Low-friction components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||