This high-quality lubricating grade brass stock sheet offers superior self-lubricating properties and excellent wear resistance. Precisely manufactured to 0.230" thickness, it's ideal for demanding applications where friction reduction is critical.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.230" |
| Length | 28" |
| Width | 32" |
Trusted by engineers across multiple sectors, this 0.230" thick brass stock sheet (28" x 32") is specifically formulated for lubricating applications. Its inherent low coefficient of friction and excellent machinability make it a preferred material for components subjected to continuous motion and high loads. The brass alloy provides good corrosion resistance and thermal conductivity, ensuring reliable performance in diverse industrial environments, particularly for bearings, bushings, and wear plates.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free from contaminants. 2. Precisely cut the brass sheet to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated component in its intended application, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for high-friction applications. | Always specify lubricating grade brass for components requiring inherent self-lubricating properties. |
| Improper cleaning of the sheet before machining or installation. | Thoroughly clean the brass stock sheet with a degreaser to remove any oils or debris that could interfere with lubrication or adhesion. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates and guides, Bushings and sleeves, Low-friction sliding surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||