This high-quality carbon steel stock sheet, measuring 0.229" thick by 26" long and 14" wide, is engineered for precise measuring and inspection tasks. Its robust material and dimensional accuracy make it ideal for critical industrial applications.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.229" |
| Length | 26" |
| Width | 14" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a substantial 0.229" thickness, providing exceptional rigidity and durability for demanding applications. Its precise dimensions of 26" in length and 14" in width ensure reliable performance in layout, fabrication, and quality control processes. The inherent strength and flatness of carbon steel make it an excellent substrate for creating custom jigs, fixtures, and calibration standards where dimensional stability is paramount. Its resistance to wear and deformation under load further enhances its utility in harsh manufacturing settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface where the stock sheet will be used is clean and level. 2. Securely fasten the stock sheet to the designated workspace using appropriate mounting hardware (e.g., clamps, bolts). 3. Verify the flatness and squareness of the installed stock sheet before proceeding with any measuring or inspection activities.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a warped or uneven surface as the mounting base, leading to inaccurate measurements. | Always ensure the mounting surface is perfectly flat and level before installing the stock sheet. |
| Over-tightening fasteners, which can cause localized deformation and affect the flatness of the sheet. | Apply fasteners evenly and to a snug, not excessive, tightness to maintain the sheet's planar integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Precision layout and marking in fabrication shops, Creation of custom jigs and fixtures, Calibration standards for inspection equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||