This 0.226" thick brass stock sheet offers superior machinability and corrosion resistance. Its robust dimensions and inherent material properties make it an excellent choice for diverse fabricating needs.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.226" |
| Length | 17" |
| Width | 35" |
Engineered for reliability and performance, this brass stock sheet boasts a thickness of 0.226 inches, a length of 17 inches, and a width of 35 inches. Composed of a high-quality brass alloy, it exhibits excellent ductility, weldability, and electrical conductivity, while maintaining high tensile strength. These properties make it exceptionally suitable for intricate machining and structural components where both formability and longevity are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the fabrication area is clean and free from contaminants. 2. Accurately measure and cut the brass sheet to the required dimensions using appropriate cutting tools. 3. Perform any necessary bending, shaping, or joining operations according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs or uneven edges. | Utilize sharp, high-speed cutting tools specifically designed for brass to achieve clean, precise cuts. |
| Inadequate support during bending or forming operations, causing unwanted deformation. | Employ proper fixturing and support mechanisms to maintain the sheet's integrity during bending and forming processes. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical connectors and components, Decorative architectural elements, Marine hardware and fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||