This 0.215-inch thick Nylon stock sheet offers exceptional durability and wear resistance. Precisely cut to 24" x 33", it is ideal for custom fabrication and demanding industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.215" |
| Length | 24" |
| Width | 33" |
Engineered for reliability and performance, this Nylon stock sheet boasts a substantial 0.215" thickness, providing superior strength and impact resistance. Its inherent properties of high tensile strength, excellent abrasion resistance, and low coefficient of friction make it suitable for a wide range of demanding applications. The generous 24" x 33" dimensions offer ample material for intricate machining and component creation, ensuring efficient material utilization in fabrication processes. This material is designed to withstand significant mechanical stress and environmental exposure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the fabricated part is designed to standard engineering tolerances for Nylon. 2. Clean surfaces thoroughly to remove any dust or debris before assembly or further machining. 3. Securely fasten or integrate the Nylon component using appropriate hardware and techniques suitable for plastic materials.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to stress cracking. | Use appropriate torque settings and consider incorporating washers to distribute load. |
| Machining at excessive speeds, causing melting or poor surface finish. | Employ recommended cutting speeds and feeds for Nylon, utilizing coolant where necessary. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear pads and guides, Gears and sprockets, Bushings and bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||