This 0.212-inch thick Nylon stock sheet is engineered for demanding material handling applications. Its robust construction offers exceptional strength, abrasion resistance, and low friction for efficient movement and longevity.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.212" |
| Length | 41" |
| Width | 38" |
A high-performance industrial component, this Nylon stock sheet boasts a substantial 0.212" thickness, providing superior load-bearing capacity and impact resistance. The 41" x 38" dimensions offer ample material for fabrication of custom components. Nylon's inherent properties include excellent tensile strength, low coefficient of friction for reduced wear and smooth operation, and good chemical resistance. These attributes make it ideal for applications requiring durability, such as chute liners, wear strips, and custom material handling guides.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired dimensions on the Nylon stock sheet. 2. Cut the sheet precisely using appropriate cutting tools for plastics. 3. Smooth all cut edges to remove burrs and ensure safe handling.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to chipping or cracking of the nylon. | Utilize sharp, specialized saw blades designed for cutting plastics to ensure clean, precise cuts. |
| Over-tightening fasteners, which can deform or stress the nylon material. | Employ washers and do not overtighten screws or bolts; allow for slight thermal expansion and contraction of the nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Chute Liners, Wear Strips, Custom Guides and Rollers, Impact Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||