This heavy-duty carbon steel stock sheet offers exceptional strength and durability. Measuring 0.204 inches thick, 39 inches long, and 14 inches wide, it's engineered for demanding industrial safety applications.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.204" |
| Length | 39" |
| Width | 14" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a thickness of 0.204 inches (approximately 5.18 mm), a length of 39 inches (990.6 mm), and a width of 14 inches (355.6 mm). Its robust carbon steel composition provides excellent tensile strength, impact resistance, and weldability, making it suitable for structural components, protective barriers, and reinforcement in high-traffic or hazardous environments. Conforms to industry standards for material integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, level, and free of debris. 2. Accurately measure and mark cut lines as per design specifications. 3. Securely fasten the sheet using appropriate industrial-grade fasteners or welding techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting leading to stress risers and potential failure. | Utilize appropriate cutting tools and techniques (e.g., plasma cutting, abrasive cutting) designed for carbon steel, and ensure clean, precise edges. |
| Inadequate surface preparation before mounting, causing poor adhesion or structural compromise. | Thoroughly clean the mounting area to remove any grease, rust, or paint, ensuring a solid, direct contact with the steel sheet. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Machine guards and enclosures, Protective barriers and shields, Industrial flooring and platforms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||