This robust 0.198-inch thick Nylon stock sheet, measuring 24 inches by 46 inches, is engineered for demanding industrial cutting and fabrication. Its superior material properties make it ideal for high-wear components.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.198" |
| Length | 24" |
| Width | 46" |
A high-performance industrial component, this Nylon stock sheet exhibits exceptional tensile strength and abrasion resistance, ideal for applications requiring durability under load and friction. Its 0.198-inch thickness combined with dimensions of 24 inches by 46 inches provides ample material for fabricating a wide range of custom parts, including wear pads, bushings, and guide components. The inherent low coefficient of friction minimizes heat generation during operation, extending component lifespan. This material is readily machinable using standard sawing and cutting techniques.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the required dimensions on the Nylon stock sheet using a suitable marking tool. 2. Securely clamp the sheet to a stable cutting surface, ensuring minimal vibration. 3. Utilize a sharp, appropriate saw blade (e.g., fine-tooth carbide) for clean and precise cuts, maintaining a consistent feed rate.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull or inappropriate saw blade, leading to chipping and rough edges. | Employ a sharp, high-quality saw blade designed for plastics, such as a fine-tooth carbide blade, and ensure it is the correct type for the cutting method. |
| Insufficient clamping of the material, resulting in vibration and inaccurate cuts. | Use robust clamps to firmly secure the Nylon stock sheet to the cutting surface, minimizing any movement or chatter during the cutting process. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Custom Bushings and Bearings, Machine Components and Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||