This high-performance lubricating grade Nylon stock sheet offers exceptional wear resistance and a low coefficient of friction. Its robust nature makes it a preferred material for demanding industrial applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.194" |
| Length | 32" |
| Width | 28" |
A proven choice for industrial professionals, this 0.194-inch thick Nylon stock sheet, measuring 32 inches by 28 inches, is engineered for superior performance in lubricating applications. Its inherent self-lubricating properties, combined with excellent tensile strength and abrasion resistance, make it ideal for components subject to continuous movement and friction. This material exhibits good chemical resistance and can withstand moderate temperatures, ensuring longevity and reliability in challenging operational environments. Standard tolerances apply to all dimensions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Precisely cut the Nylon stock to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated Nylon component using suitable mechanical fasteners, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for Nylon, leading to chipping or melting. | Utilize sharp, high-speed steel or carbide cutting tools specifically designed for machining plastics, with adequate cooling. |
| Excessive clamping force during installation, causing stress cracking or deformation. | Apply moderate, even pressure during fastening. Consider using washers to distribute load and allow for thermal expansion. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Slide plates, Conveyor components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||