This 0.185" thick Nylon stock sheet provides a robust and versatile material solution for pneumatic system fabrication and repair. Its excellent mechanical properties ensure reliable performance in demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.185" |
| Length | 36" |
| Width | 33" |
Specified by design engineers worldwide, this 0.185" thick Nylon stock sheet offers superior wear resistance and toughness, ideal for fabricating custom pneumatic components such as seals, wear pads, and mounting brackets. Measuring 33 inches wide by 36 inches long, its dimensions facilitate efficient cutting and shaping for diverse applications. Nylon's inherent lubricity reduces friction, contributing to the longevity of moving parts within pneumatic systems, while its good impact strength ensures durability under operational stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely measure and mark the required component dimensions on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., bandsaw, laser cutter) to achieve the marked dimensions. 3. Deburr all cut edges to ensure smooth operation and prevent damage to adjacent components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inappropriate cutting tools leading to poor edge quality. | Employ sharp, designated cutting tools for Nylon to achieve clean, precise edges. |
| Failing to account for material expansion/contraction due to temperature or moisture. | Allow for nominal clearance in designs to accommodate potential dimensional changes of Nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom pneumatic cylinder components, Wear strips and guide elements, Sealing surfaces and gaskets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||