This robust 0.184-inch thick Nylon stock sheet offers exceptional strength and wear resistance. Its precise 38" x 17" dimensions make it a versatile raw material for fabricating custom components.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.184" |
| Length | 38" |
| Width | 17" |
Engineered for reliability and performance, this Nylon stock sheet boasts a nominal thickness of 0.184 inches, a standard length of 38 inches, and a width of 17 inches. Crafted from high-grade nylon, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction, making it suitable for demanding applications in the industrial sector. Its inherent toughness and chemical resistance ensure longevity in harsh environments. The precise dimensions facilitate efficient machining and fabrication of intricate parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting surface is clean and stable. 2. Precisely measure and mark the desired cut lines on the Nylon stock sheet. 3. Utilize appropriate cutting tools (e.g., band saw, laser cutter) to achieve clean, accurate cuts.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to rough edges and potential material stress. | Always employ sharp, high-quality cutting tools specifically designed for plastics or nylon. |
| Exceeding recommended cutting speeds, causing excessive heat buildup and melting. | Refer to material datasheets for optimal cutting speeds and feeds for nylon to prevent overheating. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Gears and Bearings, Wear Strips and Bushings, Custom Machined Parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||