This 0.182-inch thick carbon steel stock sheet offers exceptional strength and formability. Measuring 19 inches by 37 inches, it's engineered for demanding fabrication projects, providing a reliable foundation for a wide range of applications.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.182" |
| Length | 19" |
| Width | 37" |
Built to exacting engineering tolerances, this 0.182" (approx. 4.6mm) thick carbon steel stock sheet is manufactured from high-grade material, ensuring consistent mechanical properties for reliable performance in demanding environments. Its precise dimensions of 19" (482.6mm) x 37" (939.8mm) facilitate seamless integration into complex assemblies and reduce post-fabrication adjustments. The material's inherent ductility and weldability make it suitable for MIG, TIG, and Stick welding processes, while its robust tensile strength supports structural integrity in load-bearing applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare surfaces by degreasing and removing any mill scale or rust. 2. Ensure proper fitment within the intended assembly or structure. 3. Proceed with cutting, bending, welding, or other forming operations as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding parameters for the 0.182" thickness, leading to inadequate penetration or burn-through. | Consult welding procedure specifications (WPS) for 4.6mm carbon steel, ensuring appropriate amperage, voltage, and travel speed are employed. |
| Neglecting surface preparation before welding or coating, resulting in poor adhesion and premature failure. | Thoroughly clean and degrease the carbon steel surface, and remove any mill scale, rust, or contaminants before any subsequent fabrication steps. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Structural framing and supports, Machine bases and enclosures, Custom brackets and fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||