This robust brass stock sheet, measuring 0.177 inches thick, 19 inches wide, and 34 inches long, is engineered for exceptional performance in pneumatic applications. Its superior material properties ensure reliability and longevity.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.177" |
| Length | 19" |
| Width | 34" |
Manufactured under strict quality controls, this 0.177" thick brass stock sheet offers excellent machinability and inherent corrosion resistance, crucial for pneumatic system components. Its precise dimensions of 19" x 34" ensure compatibility and ease of fabrication for manifolds, valve bodies, and custom fittings. Brass's non-sparking properties also make it suitable for environments where ignition sources are a concern. This material provides a stable and durable foundation for components subjected to moderate pressures and varying environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to required dimensions using appropriate metalworking tools. 2. Machine to final component specifications, adhering to pneumatic design tolerances. 3. Integrate fabricated components into the pneumatic system, ensuring proper sealing and connection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material for high-pressure pneumatic applications. | Verify the required material thickness based on the operating pressure and safety factors of the pneumatic system. Consult engineering specifications for critical components. |
| Improper cleaning of brass surfaces before sealing or joining. | Thoroughly degrease and clean all mating surfaces of the brass sheet to ensure a leak-free seal and prevent contamination of the pneumatic system. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pneumatic Manifold Fabrication, Custom Pneumatic Valve Bodies, Pneumatic Fitting Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||