This 0.169-inch thick polycarbonate stock sheet, measuring 18" x 22", is engineered for robust suspending and bracing solutions. Its superior impact strength and clarity make it ideal for demanding structural applications.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.169" |
| Length | 18" |
| Width | 22" |
Engineered for reliability and performance, this 0.169" thick polycarbonate stock sheet offers exceptional impact resistance, clarity, and UV stability. Measuring 18" in length and 22" in width, it is ideal for applications requiring high tensile strength and durability under load. Polycarbonate's inherent toughness minimizes the risk of catastrophic failure, making it a superior choice for structural bracing, transparent guarding, and secure suspending elements in industrial and commercial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris. 2. Precisely mark and cut the polycarbonate to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet using specified hardware and techniques suitable for polycarbonate, avoiding over-tightening which can cause stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drills without proper bit selection for polycarbonate. | Utilize specialized polycarbonate drill bits or high-speed steel bits with a 60-degree point angle, and maintain a consistent drilling speed to prevent heat buildup and cracking. |
| Over-tightening fasteners, leading to stress fractures around mounting points. | Employ washers to distribute pressure and tighten fasteners only until snug, allowing for thermal expansion and contraction without inducing undue stress. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Structural bracing components, Machine guarding and enclosures, Transparent support structures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||