This 0.169" thick carbon steel stock sheet, measuring 19" by 16", offers exceptional strength and formability. It is a foundational raw material for a wide array of manufacturing and fabrication needs.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.169" |
| Length | 19" |
| Width | 16" |
Specified by design engineers worldwide, this carbon steel stock sheet boasts a precise thickness of 0.169 inches (4.30 mm), a standard length of 19 inches (482.6 mm), and a width of 16 inches (406.4 mm). Composed primarily of iron and carbon, its mechanical properties are optimized for robust performance, exhibiting excellent tensile strength and weldability, making it ideal for structural components, chassis fabrication, and custom tooling where reliability and cost-effectiveness are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the stock sheet is clean and free from any contaminants or surface imperfections. 2. Accurately measure and mark cut lines according to design specifications using appropriate marking tools. 3. Employ suitable cutting methods (e.g., plasma cutting, shearing, band saw) to achieve precise dimensions, maintaining edge quality.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull or incorrect cutting tools, leading to ragged edges and dimensional inaccuracies. | Utilize sharp, high-quality cutting tools appropriate for carbon steel thickness and ensure proper feed rates to maintain clean, precise cuts. |
| Inadequate surface preparation before welding or forming, resulting in poor adhesion or structural weaknesses. | Thoroughly clean the material surface, removing all oils, greases, and scale, especially in weld zones, to ensure optimal bond strength and material integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: General fabrication and structural components, Machine bases and supports, Prototyping and custom tooling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||