This industrial-grade Nylon stock sheet offers exceptional durability and machinability. Its robust properties make it ideal for custom fabrication of jigs, fixtures, wear components, and electrical insulation in demanding environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.167" |
| Length | 45" |
| Width | 43" |
Precision-manufactured to tight tolerances, this 0.167" thick Nylon stock sheet measures 45 inches in length and 43 inches in width. Composed of high-performance nylon, it exhibits excellent tensile strength, abrasion resistance, and low coefficient of friction, crucial for applications requiring smooth movement and longevity. Its dielectric properties also lend themselves to effective electrical insulation. This material is readily machined using standard industrial equipment, allowing for the creation of complex geometries for jigs, fixtures, bearings, bushings, and protective wear pads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark desired cut lines on the nylon stock sheet using appropriate marking tools. 2. Utilize a suitable cutting method (e.g., saw, CNC router) with appropriate tooling for nylon to achieve precise dimensions. 3. Deburr and finish cut edges as required for the intended application, ensuring smooth surfaces and removal of any sharp edges.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting speeds or feed rates, leading to melting or chipping. | Consult material datasheets for recommended machining parameters for nylon. Employ sharp tooling and adequate cooling to prevent overheating. |
| Improper clamping, causing stress or deformation during machining. | Securely clamp the nylon sheet to prevent movement, but avoid over-tightening which can induce stress and warp the material. Use soft jaws or protective material under clamps. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Jigs and Fixtures, Wear Strips and Bushings, Electrical Insulation Components, Gaskets and Seals, Chute Liners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||