This high-strength carbon steel stock sheet is engineered for demanding pneumatic applications. Its robust construction ensures exceptional durability and reliable performance in high-pressure environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.166" |
| Length | 12" |
| Width | 17" |
Purpose-built for heavy-duty applications, this 0.166" thick carbon steel sheet offers superior tensile strength and impact resistance, crucial for pneumatic system integrity. Measuring 12" in width and 17" in length, it provides ample material for fabricating custom brackets, enclosures, and structural components. The material's inherent rigidity and machinability allow for precise component creation, ensuring tight tolerances essential for leak-free pneumatic operation. Its suitability spans industrial automation, heavy machinery pneumatics, and high-cycle manufacturing equipment where component failure is not an option.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to precise dimensions as per design specifications. 2. Prepare edges for welding or fastening, ensuring a clean and deburred surface. 3. Integrate into pneumatic system assembly, applying appropriate joining techniques (e.g., welding, bolting).
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or thinner gauge material for high-pressure pneumatic components. | Always verify material specifications against system pressure and load requirements to ensure adequate strength and safety. |
| Inadequate edge preparation before joining, leading to weak welds or poor sealing. | Thoroughly clean and deburr all cut edges to promote strong metallurgical bonds and prevent stress concentrations. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic Actuator Mounts, Pressure Vessel Components, Heavy-Duty Pneumatic Manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||