This high-performance nylon stock sheet is engineered for superior lubrication and wear resistance. Its precise dimensions and resilient material make it ideal for fabricating components subjected to friction and high stress in industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.165" |
| Length | 20" |
| Width | 27" |
Built to exacting engineering tolerances, this 0.165-inch thick nylon stock sheet offers a robust solution for demanding applications. Manufactured from a specialized lubricating grade nylon, it exhibits a significantly reduced coefficient of friction, minimizing wear and extending the service life of mating components. The material's inherent strength and resistance to abrasion ensure reliable performance under continuous operation. Its dimensions of 20 inches by 27 inches provide ample material for custom fabrication of bearings, bushings, guides, and wear pads. Excellent chemical resistance to common industrial solvents and oils further enhances its suitability for diverse operational settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully measure and mark the desired component dimensions on the nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., band saw, CNC router) for precise fabrication. 3. Smooth all cut edges and surfaces to remove any burrs or imperfections. 4. Mount the fabricated component securely in its intended application, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard nylon when a lubricating grade is required for low-friction applications. | Always select the specific lubricating grade nylon stock sheet for applications where reduced friction and wear are critical. |
| Improper edge finishing after cutting, leading to premature wear. | Thoroughly deburr and smooth all cut edges to prevent abrasion and ensure smooth operation of the fabricated part. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Self-lubricating bearings and bushings, Wear strips and guide rails, Chute liners and slide surfaces, Gears and sprockets in low-load environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||