This industrial-grade carbon steel stock sheet, measuring 0.163 inches thick, 32 inches by 40 inches, provides exceptional strength and rigidity for demanding shipping and packaging applications.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.163" |
| Length | 32" |
| Width | 40" |
Specified by design engineers worldwide, this carbon steel stock sheet is manufactured to precise tolerances, ensuring consistent performance and reliability. With a thickness of 0.163 inches, a length of 32 inches, and a width of 40 inches, it offers substantial material for fabrication. The inherent strength and durability of carbon steel make it ideal for constructing heavy-duty crates, protective barriers, custom shipping containers, and structural components requiring high tensile strength and impact resistance. Its machinability and weldability facilitate integration into complex assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean surfaces to be joined. 2. Position sheet according to design specifications. 3. Secure using appropriate fasteners or welding techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material for high-stress applications. | Always verify the required material thickness for the intended load and stress factors based on engineering calculations or established standards. |
| Inadequate surface preparation before joining or coating. | Thoroughly degrease and remove any mill scale, rust, or contaminants to ensure proper adhesion of coatings or weld integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty shipping crates, Protective barriers and enclosures, Custom industrial packaging solutions.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||