This 0.158-inch thick carbon steel stock sheet, measuring 35 inches by 30 inches, offers exceptional durability and dimensional stability for a wide range of industrial applications. Its robust construction ensures reliable performance in demanding environments.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.158" |
| Length | 35" |
| Width | 30" |
Built to exacting engineering tolerances, this carbon steel stock sheet features a precise thickness of 0.158 inches, a generous length of 35 inches, and a width of 30 inches. Composed of high-quality carbon steel, it exhibits excellent tensile strength, hardness, and wear resistance. This material is readily machinable, weldable, and formable, making it suitable for custom fabrication of fixtures, jigs, templates, and precision tooling. Its inherent rigidity and flatness are critical for accurate measurement and inspection setups, ensuring consistent results in quality control processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface of the stock sheet thoroughly to remove any debris or protective coatings. 2. Position the stock sheet according to the project's design requirements, ensuring it is level and stable. 3. Secure the stock sheet using appropriate fastening methods, such as welding, bolting, or clamping, as dictated by the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor adhesion or weld quality. | Always degrease and clean the carbon steel surface before any fabrication or finishing steps. |
| Overheating during welding, causing material deformation or loss of temper. | Utilize proper welding techniques and heat management to prevent distortion and maintain material integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Precision fabrication of jigs and fixtures, Tooling and die construction, Inspection and measurement templates, Machine bases and structural components, Custom workpiece fixturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||