This premium brass stock sheet, measuring 0.158 inches thick, 40 inches in length, and 29 inches in width, is engineered for demanding fabrication tasks. Its superior material properties ensure longevity and performance.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.158" |
| Length | 40" |
| Width | 29" |
Trusted by engineers across multiple sectors, this 0.158" thick brass stock sheet offers exceptional machinability and corrosion resistance, making it a prime choice for custom component fabrication. The material's inherent strength and conductivity, combined with its precise dimensions (40" L x 29" W), ensure consistent results in diverse manufacturing processes, from intricate designs to robust structural elements. It is ideally suited for applications requiring a balance of mechanical integrity and aesthetic appeal, performing reliably under various environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the fabrication area is clean and well-lit. 2. Carefully handle the brass sheet to avoid scratches or dents. 3. Utilize appropriate cutting, bending, and joining techniques as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to burrs or uneven edges. | Employ sharp, dedicated cutting tools designed for non-ferrous metals, and deburr edges thoroughly after cutting. |
| Inadequate surface preparation before welding or joining. | Thoroughly clean and degrease the joint surfaces to ensure optimal adhesion and prevent contamination. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom component manufacturing, Decorative metalwork, Electrical connector fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||