This 0.157-inch thick Nylon stock sheet, measuring 22x38 inches, is a robust raw material solution engineered for superior strength and wear resistance in diverse industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.157" |
| Length | 22" |
| Width | 38" |
A proven choice for industrial professionals, this 0.157" thick Nylon stock sheet offers exceptional mechanical strength, excellent abrasion resistance, and good electrical insulation properties. Its dimensions of 22" x 38" provide ample material for fabrication. Nylon's inherent toughness and resistance to chemicals make it suitable for components subjected to high stress and continuous operation, ensuring longevity and reliability in demanding applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully cut the Nylon stock sheet to the desired dimensions using appropriate cutting tools. 2. Smooth any rough edges with a deburring tool or fine-grit sandpaper. 3. Secure the fabricated Nylon component using standard fastening methods, ensuring compatibility with surrounding materials.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Utilize sharp, carbide-tipped blades specifically designed for cutting Nylon or other plastics to ensure clean, precise cuts and prevent material damage. |
| Overheating the material during fabrication processes like bending or welding, causing degradation. | Control heat input carefully, employing appropriate temperatures and cooling methods, to avoid compromising the Nylon's structural integrity and mechanical properties. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear pads and guide rails, Bushings and bearings, Protective covers and guards.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||