This 0.157-inch thick 304 stainless steel stock sheet is engineered for demanding electrical and lighting applications. Its superior corrosion resistance and durability ensure long-term performance in challenging environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.157" |
| Length | 35" |
| Width | 16" |
Manufactured under strict quality controls, this 0.157" thick sheet boasts a nominal dimension of 16" in width and 35" in length. Fabricated from premium 304 stainless steel, it offers exceptional resistance to corrosion and oxidation, making it ideal for environments exposed to moisture or chemicals. The material's inherent strength and formability allow for precise fabrication of electrical enclosures, lighting fixture housings, control panels, and other critical components where reliability and longevity are paramount. Meets ASTM A240 standards.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all cutting and bending tools are clean and free from contaminants. 2. Precisely measure and mark desired cut lines according to design specifications. 3. Utilize appropriate cutting methods (e.g., shear, laser, waterjet) to achieve clean edges. 4. Form sheet to required angles and shapes, ensuring no excessive stress or deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using contaminated tools leading to surface imperfections or galvanic corrosion. | Thoroughly clean all tools before and during fabrication. Use dedicated stainless steel tooling where possible. |
| Excessive heat during cutting or welding, causing sensitization and reducing corrosion resistance. | Employ rapid cooling techniques and low heat input methods. If welding, ensure proper shielding gas and post-weld cleaning. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Electrical Enclosure Fabrication, Lighting Fixture Housings, Control Panel Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||