This robust carbon steel stock sheet, measuring 0.153" in thickness, 23" in length, and 19" in width, is engineered for superior performance in lubricating applications within rigorous industrial settings.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.153" |
| Length | 23" |
| Width | 19" |
Designed for demanding industrial environments, this 0.153" thick carbon steel stock sheet offers exceptional durability and formability. Its precise dimensions of 23" x 19" ensure accurate integration into various manufacturing processes. The inherent strength of carbon steel provides excellent resistance to wear and abrasion, crucial for applications involving lubrication systems, such as bearing housings, guide rails, and containment trays. This material's machinability allows for custom fabrication and precise fitting, while its cost-effectiveness makes it an ideal choice for high-volume production runs and maintenance spares.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface, ensuring it is clean, level, and free from contaminants. 2. Position the carbon steel sheet according to the design specifications, aligning any pre-drilled holes or required cutouts. 3. Secure the sheet firmly using appropriate fasteners (e.g., bolts, rivets) ensuring even torque distribution to prevent deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor adhesion or alignment. | Thoroughly clean and degrease the mounting surface before installation to ensure optimal contact and stability. |
| Over-tightening fasteners, causing stress concentrations and potential warping of the sheet. | Utilize a torque wrench set to the manufacturer's recommended specifications for all fasteners to ensure even pressure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Lubrication system components, Bearing housings and supports, Guide rails and slide surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||