This premium brass stock sheet is engineered for optimal performance in lubricating applications. Its inherent properties provide superior wear resistance and low friction, ensuring extended component life and operational efficiency.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.153" |
| Length | 36" |
| Width | 29" |
Precision-manufactured to tight tolerances, this brass stock sheet measures 0.153" in thickness, 36" in length, and 29" in width. Composed of a high-quality brass alloy, it exhibits excellent inherent lubricity, a low coefficient of friction, and good machinability. These characteristics make it exceptionally well-suited for applications where reduced wear and smooth operation are critical, such as bearing surfaces, wear plates, and self-lubricating components in machinery and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both mating surfaces thoroughly to remove any debris or contaminants. 2. Ensure the brass stock sheet is cut to the precise dimensions required for the application. 3. Securely affix the brass sheet using appropriate mechanical fasteners or adhesives, ensuring flush contact with the substrate.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower-grade brass alloy that may not offer sufficient lubricity. | Always specify and verify the brass alloy composition to ensure it meets the requirements for low friction and wear resistance. |
| Improper surface preparation leading to reduced adhesion or premature wear. | Thoroughly clean and prepare all mating surfaces before installation to ensure optimal performance and longevity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates for sliding mechanisms, Bushings and sleeves in low-friction environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||