This high-grade carbon steel stock sheet provides exceptional structural integrity for demanding shipping and packaging applications. Its robust composition ensures reliable containment and protection of goods in transit.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.146" |
| Length | 29" |
| Width | 38" |
Built to exacting engineering tolerances, this 0.146" thick carbon steel stock sheet offers a precisely measured 29" length and 38" width. Its inherent tensile strength and rigidity make it ideal for fabricating custom crates, protective enclosures, and reinforced pallets. The material's cold-rolled finish ensures a smooth surface, facilitating further processing and minimizing potential damage to contents. Its composition provides excellent weldability and formability, allowing for tailored solutions in industrial packaging and material handling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the sheet by cleaning the surface of any debris or oils. 2. Accurately measure and mark cut lines according to design specifications. 3. Fabricate using appropriate cutting, bending, and joining equipment (e.g., shears, press brakes, welding equipment).
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Incorrectly measuring for cuts, leading to material waste and assembly issues. | Double-check all measurements against the design specifications before cutting the sheet. |
| Using improper joining techniques, compromising the structural integrity of the final assembly. | Ensure welding or fastening methods are appropriate for the carbon steel thickness and intended load-bearing capacity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom protective packaging enclosures, Reinforced shipping crates and skids, Industrial material handling platforms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||