This 0.142-inch thick carbon steel stock sheet, measuring 20 inches by 33 inches, offers exceptional flatness and dimensional stability. Engineered for demanding industrial applications requiring precise layout and fabrication.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.142" |
| Length | 20" |
| Width | 33" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a nominal thickness of 0.142 inches (approximately 3.6mm) and precise dimensions of 20 inches by 33 inches. The material exhibits excellent hardness and wear resistance characteristic of high-carbon steel, making it suitable for applications demanding durability and structural integrity. Its inherent flatness and minimal distortion ensure consistent performance in precision tooling, die-making, layout tables, and fabrication projects where accuracy is paramount. Surface finish is optimized for machinability and subsequent treatment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface thoroughly to remove any contaminants. 2. Position the stock sheet in the desired location, ensuring proper support. 3. Secure the stock sheet according to the requirements of the specific application (e.g., bolting, welding, clamping).
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the sheet for applications requiring extreme corrosion resistance without protective coatings. | Apply appropriate coatings (e.g., paint, plating, powder coating) or select a stainless steel alternative for corrosive environments. |
| Subjecting the sheet to excessive heat without considering potential warping. | Implement controlled heating processes or use heat sinks to mitigate thermal distortion. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Precision layout and marking surfaces, Die and mold construction, Industrial tooling and fixtures, Fabrication of machine bases and supports, Jigs and templates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||