This 0.141-inch thick Nylon stock sheet offers exceptional tensile strength and wear resistance. Measuring 45 inches by 25 inches, it provides a versatile raw material for robust fabrication and component manufacturing.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.141" |
| Length | 45" |
| Width | 25" |
Built to exacting engineering tolerances, this 0.141-inch thick Nylon stock sheet is manufactured from high-performance polyamide, ensuring consistent dimensional stability and superior mechanical properties. The 45-inch length and 25-inch width provide ample material for intricate machining and large-scale parts. Nylon's inherent characteristics, including excellent abrasion resistance, good chemical resistance, and a high strength-to-weight ratio, make it ideal for wear components, bushings, gears, and structural elements subjected to moderate loads and friction. Its low coefficient of friction also contributes to smooth operation in moving parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cut lines on the Nylon stock sheet using a suitable marking tool. 2. Employ appropriate cutting tools (e.g., band saw, CNC router) to precisely cut the sheet to the required dimensions. 3. Smooth all cut edges using a deburring tool or fine-grit sandpaper for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners | Use appropriate torque specifications to avoid cracking or deforming the Nylon material. |
| Using incorrect machining speeds | Employ slower speeds and adequate lubrication during machining to prevent excessive heat buildup and material melting. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Gears and sprockets, Protective covers, Custom fabricated components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||