This 0.134-inch thick polycarbonate stock sheet offers superior impact resistance and a built-in lubricating quality, making it ideal for demanding industrial environments requiring reduced friction and wear.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.134" |
| Length | 39" |
| Width | 34" |
A high-performance industrial component, this 0.134" thick polycarbonate stock sheet (39" x 34") is engineered for applications demanding both mechanical robustness and low friction. Polycarbonate's inherent strength provides excellent impact and abrasion resistance, while its specialized formulation imparts self-lubricating properties, reducing wear and tear on mating parts. This material exhibits good chemical resistance and can operate within a broad temperature range, ensuring reliability in diverse industrial settings. Its dimensional stability further contributes to precise part fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, ensuring alignment with any pre-drilled holes or mounting points. 3. Secure the sheet using appropriate fasteners, taking care not to over-tighten which could cause stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard polycarbonate where lubricating properties are required. | Select this specialized lubricating grade polycarbonate for applications where friction reduction is critical to performance and longevity. |
| Improper fastening leading to stress concentration. | Utilize oversized holes for fasteners and consider using washers to distribute load, preventing stress points and potential cracking. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction sliding components, Wear strips and guides, Conveyor system components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||