This 0.134" thick carbon steel stock sheet, measuring 21"x32", is specifically engineered for lubricating applications. Its precise dimensions and robust material composition ensure reliable performance in demanding industrial environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.134" |
| Length | 21" |
| Width | 32" |
Manufactured under strict quality controls, this carbon steel stock sheet exhibits excellent tensile strength and formability, crucial for its intended lubricating functions. The 0.134" thickness provides significant durability for wear resistance, while the 21"x32" dimensions offer ample material for diverse fabrication needs. Its carbon content is optimized to facilitate effective lubrication and reduce friction in mechanical systems. This material is ideally suited for components subjected to high stress and sliding contact, ensuring longevity and operational efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the stock sheet thoroughly to remove any surface contaminants. 2. Cut the sheet to the required dimensions using appropriate metalworking tools. 3. Fabricate the component according to design specifications, ensuring smooth edges for optimal lubrication.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using untreated or dirty stock sheet for critical components. | Always clean and degrease the stock sheet before fabrication and installation. |
| Improper cutting techniques leading to burrs or uneven edges. | Employ sharp, appropriate cutting tools and deburr all edges meticulously after cutting. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Bearing surfaces, Slider plates, Wear strips, Guide rails.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||