This self-lubricating Nylon stock sheet offers superior wear resistance and low friction. Ideal for manufacturing custom components where reduced operational noise and extended service life are critical.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.132" |
| Length | 45" |
| Width | 35" |
Engineered for reliability and performance, this Nylon stock sheet boasts a critical thickness of 0.132 inches, providing robust structural integrity. Manufactured from high-grade Nylon, it exhibits excellent tensile strength and abrasion resistance. Its inherent self-lubricating properties minimize friction and wear, making it ideal for high-cycle applications and environments where traditional lubrication is impractical. The generous dimensions of 45 inches in length and 35 inches in width allow for efficient fabrication of diverse components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate tooling. 2. Machine or form the component to its final specification, ensuring tight tolerances. 3. Install the fabricated Nylon part into its intended assembly, verifying proper fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overheating during machining, leading to material degradation. | Utilize appropriate cutting speeds and lubrication during machining to prevent excessive heat buildup. |
| Incorrectly selecting Nylon grade for extreme temperature or chemical exposure. | Consult material compatibility charts to ensure the chosen Nylon grade is suitable for the specific operating environment. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Low-friction bearings and bushings, Wear strips and guide rails, Gears and sprockets in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||