This high-grade brass stock sheet, precisely manufactured to 0.130" thickness, offers exceptional durability and workability. Its consistent dimensions make it a reliable choice for critical measuring and inspection tasks.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.130" |
| Length | 20" |
| Width | 13" |
Built to exacting engineering tolerances, this brass stock sheet boasts a nominal thickness of 0.130 inches (±0.002"), a length of 20 inches (±0.05"), and a width of 13 inches (±0.05"). Composed of a standard brass alloy, it exhibits excellent machinability, corrosion resistance, and moderate electrical conductivity, making it suitable for a variety of demanding industrial applications where dimensional accuracy and material integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the workspace is clean and free of debris. 2. Carefully unroll or position the brass sheet to prevent scratching or bending. 3. Measure and mark precise cut lines according to project specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during cutting, leading to deformation. | Employ appropriate cutting tools and techniques for brass, such as a fine-toothed saw or shears, and apply steady, controlled pressure. |
| Improper handling causing surface scratches or dents. | Always wear clean gloves when handling the brass sheet and use protective coverings on work surfaces. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision tooling and jig construction, Industrial measurement templates and guides, Electrical grounding components and contacts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||