This 0.124-inch thick polycarbonate stock sheet, measuring 34 inches by 44 inches, offers exceptional strength and clarity for demanding suspending and bracing applications in industrial settings.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.124" |
| Length | 34" |
| Width | 44" |
Manufactured under strict quality controls, this 0.124" thick polycarbonate stock sheet provides superior impact resistance and durability. Its dimensions of 34" x 44" make it suitable for a wide range of custom fabrication needs. Polycarbonate's inherent toughness and excellent optical clarity allow for reliable performance in applications requiring both structural integrity and visibility, such as protective guards, machine enclosures, and structural bracing components. The material's broad temperature range and UV resistance further enhance its suitability for diverse environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely cut the polycarbonate sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using corrosion-resistant fasteners, pre-drilling holes slightly larger than the fastener diameter to accommodate thermal expansion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress cracks. | Use washers and do not overtighten screws; allow for expansion with oversized pilot holes. |
| Using abrasive cleaners or solvents that can damage the polycarbonate surface. | Clean with mild soap and water or a specialized polycarbonate cleaner. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guarding and enclosures, Structural bracing components, Industrial partitions and screens.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||