This 0.118" thick carbon steel stock sheet, measuring 47" x 18", offers exceptional strength and durability for demanding shipping and packaging applications. Engineered for robust performance and longevity.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.118" |
| Length | 47" |
| Width | 18" |
Built to exacting engineering tolerances, this 0.118-inch thick carbon steel sheet exhibits a minimum tensile strength of 400 MPa and a yield strength of 250 MPa, ensuring superior load-bearing capacity. Its precise 47-inch length and 18-inch width allow for efficient material utilization in custom fabrication and protective packaging solutions. The inherent rigidity and impact resistance of carbon steel make it ideal for heavy-duty crates, bracing, and structural components requiring consistent dimensional stability and resistance to deformation under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare surface for sheet application, ensuring it is clean and free of debris. 2. Measure and cut the carbon steel sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet using welding, bolting, or other suitable fastening methods based on the application's structural requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard gauge measurements without verifying actual thickness. | Always confirm the sheet's actual thickness using a caliper or micrometer to ensure it meets the required 0.118" specification. |
| Neglecting edge preparation before welding or fastening. | Properly bevel or clean the edges of the carbon steel sheet to ensure strong and reliable welds or secure mechanical fastenings. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty shipping crates and containers, Protective bracing and dunnage for fragile goods, Custom fabrication of industrial shelving and supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||