This premium brass stock sheet, precisely manufactured to 0.118" thickness, 24" length, and 13" width, offers superior durability and corrosion resistance for demanding material handling applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.118" |
| Length | 24" |
| Width | 13" |
Built to exacting engineering tolerances, this brass stock sheet features a nominal thickness of 0.118 inches (3.00 mm), a length of 24 inches (609.6 mm), and a width of 13 inches (330.2 mm). Composed of a high-copper alloy, it exhibits excellent machinability, good electrical conductivity, and inherent antimicrobial properties. Its robust mechanical strength makes it suitable for fabrication into custom brackets, slides, support structures, and wear plates within material handling systems, ensuring reliable performance and extended service life in moderate to high-stress environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting or fabrication area is clean and well-lit. 2. Utilize appropriate safety equipment, including eye protection and gloves. 3. Precisely cut or form the brass sheet to the required dimensions using suitable metalworking tools.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for brass, leading to poor edge quality. | Employ sharp, high-speed steel or carbide-tipped cutting tools specifically recommended for brass to achieve clean, precise cuts. |
| Ignoring the material's potential for tarnishing over time in exposed environments. | Consider applying a protective coating or lacquering the brass surface if aesthetics or consistent surface integrity are critical for long-term application. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom fabricated material handling guides, Durable wear plates for conveyor systems, Corrosion-resistant structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||