This premium brass stock sheet, measuring 0.115" thick by 44" x 33", is engineered for superior performance in abrading and polishing tasks. Its consistent material properties ensure reliable results.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.115" |
| Length | 44" |
| Width | 33" |
Engineered for reliability and performance, this brass stock sheet is manufactured to precise tolerances. With a thickness of 0.115 inches, a length of 44 inches, and a width of 33 inches, it offers ample surface area for various projects. The brass composition provides excellent malleability, corrosion resistance, and a desirable aesthetic, making it ideal for custom fabrication and demanding finishing processes where consistent material behavior is critical for achieving uniform abrasive action and a polished surface.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the substrate by cleaning thoroughly to remove any dust or debris. 2. Position the brass sheet accurately onto the designated surface. 3. Secure the sheet using appropriate fastening methods, ensuring even tension across the material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an improperly cleaned surface for application. | Ensure the substrate is free of all contaminants before attaching the brass sheet to prevent adhesion issues and ensure a smooth finish. |
| Uneven tensioning of the brass sheet. | Apply fasteners systematically and with consistent pressure to avoid warping or buckling, which can compromise the effectiveness of abrading or polishing. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom abrasive pads, Polishing jigs and fixtures, Surface preparation for decorative finishes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||