This high-quality carbon steel stock sheet provides a robust and cost-effective solution for fabricating electrical enclosures, lighting components, and other industrial applications requiring structural integrity.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.111" |
| Length | 35" |
| Width | 48" |
A proven choice for industrial professionals, this 0.111" thick carbon steel stock sheet offers exceptional strength and durability. Measuring 35" in length and 48" in width, it provides ample material for complex fabrications. Its inherent toughness and malleability make it ideal for applications demanding resistance to impact and stress, common in electrical distribution and protective housing. The material's consistent composition ensures reliable welding and forming properties, critical for maintaining enclosure integrity and performance standards in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare surfaces by cleaning to remove any oil, dirt, or debris. 2. Fabricate the sheet to required dimensions using appropriate cutting and bending techniques. 3. Securely fasten the fabricated component to the intended assembly using approved fasteners or welding methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong gauge for structural load. | Verify the required thickness and material strength against the specific application's load-bearing requirements. |
| Inadequate surface preparation before painting or coating. | Thoroughly degrease and abrade surfaces to ensure proper adhesion of protective coatings, preventing premature corrosion. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Electrical Enclosure Fabrication, Lighting Fixture Housings, Industrial Control Panel Backing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||