This high-quality nylon stock sheet offers exceptional durability and machinability. Precisely cut to 0.110" thickness, 29" length, and 31" width, it's designed for demanding industrial applications requiring robust performance.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.110" |
| Length | 29" |
| Width | 31" |
Engineered for reliability and performance, this 0.110" thick nylon stock sheet boasts a generous 29" x 31" dimension, providing ample material for a wide range of fabrication needs. Its inherent properties of high tensile strength, excellent abrasion resistance, and good impact strength make it suitable for creating custom gears, bearings, wear pads, and protective components. The consistent material composition ensures predictable machining behavior for precise cutting, milling, and drilling, minimizing waste and ensuring dimensional accuracy for critical parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired cut lines on the nylon stock sheet using a suitable marking tool. 2. Secure the stock sheet firmly to the cutting surface using clamps or a vise to prevent movement during the sawing process. 3. Use a sharp, appropriately toothed saw blade (e.g., fine-tooth hacksaw, jigsaw with a plastic-cutting blade, or band saw) and a moderate, consistent feed rate to achieve clean cuts.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull or incorrect saw blade, leading to rough cuts and material melting. | Always employ a sharp blade specifically designed for cutting plastics or nylon. Consider a blade with a higher tooth count for smoother finishes. |
| Excessive heat buildup during cutting, causing the nylon to melt and gum up the blade. | Employ a steady, controlled cutting speed and consider using a lubricant (e.g., cutting fluid or soapy water) to dissipate heat and improve cut quality. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads and guides, Fabrication of gears and sprockets, Machined bushings and bearings, Protective covers and shields, Insulating components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||