This premium brass stock sheet, in a 0.110" thickness, is specifically engineered for lubricating applications. Its inherent properties provide excellent wear resistance and a low coefficient of friction, ensuring optimal performance in demanding environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.110" |
| Length | 25" |
| Width | 47" |
Built to exacting engineering tolerances, this 0.110" thick brass stock sheet measures 25" in length and 47" in width. Composed of a high-quality brass alloy, it exhibits superior self-lubricating characteristics, excellent machinability, and good corrosion resistance. These attributes make it ideal for applications requiring reduced friction and wear, such as bearing surfaces, sliding components, and specialized bushings where consistent lubrication is critical for operational longevity and efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the receiving surface is clean, dry, and free of debris. 2. Accurately cut the brass stock sheet to the required dimensions using appropriate cutting tools for sheet metal. 3. Securely fasten the brass sheet to the designated area using approved mechanical fasteners or adhesives suitable for the application environment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for high-friction applications. | Select lubricating grade brass stock for its inherent self-lubricating properties and reduced wear. |
| Improper surface preparation before installation. | Thoroughly clean and degrease both the brass sheet and the mounting surface to ensure optimal adhesion and performance. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Sliding components, Wear plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||