This 0.109-inch thick Nylon stock sheet, measuring 31 by 13 inches, is engineered for robust industrial fabrication. Its superior mechanical properties ensure longevity in high-stress environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.109" |
| Length | 31" |
| Width | 13" |
Purpose-built for heavy-duty applications, this 0.109" thick Nylon stock sheet offers exceptional tensile strength, abrasion resistance, and a low coefficient of friction. Its dimensions of 31" length and 13" width make it ideal for custom machining of gears, wear pads, bushings, and impact-resistant components. The inherent toughness of Nylon allows it to withstand significant loads and repeated stress cycles without degradation, ensuring reliable performance in demanding operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Machine or form the cut material according to design specifications, ensuring proper tolerances. 3. Secure the fabricated component using suitable fastening methods, considering the material's properties.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Employ carbide-tipped blades or specialized plastic cutting tools for a clean, precise cut. |
| Over-tightening fasteners, potentially causing stress cracking in the Nylon. | Use appropriate torque settings and consider the use of washers to distribute load when securing components. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Machined Gears, Wear Strips and Bushings, Impact Absorbing Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||