This 0.095-inch thick nylon stock sheet, measuring 37" x 28", is engineered for robust fabricating needs. Its inherent material properties ensure exceptional durability and performance in demanding environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.095" |
| Length | 37" |
| Width | 28" |
Built to exacting engineering tolerances, this 0.095" nylon stock sheet boasts a precise 37" length and 28" width. Manufactured from high-performance nylon, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction. This material is ideal for wear pads, bushings, gears, and protective components in industrial machinery, automotive applications, and material handling systems where durability and reduced friction are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting surface is clean and stable. 2. Precisely mark the desired dimensions on the nylon sheet using a suitable marker. 3. Utilize appropriate cutting tools (e.g., industrial saw, router) to achieve accurate dimensions, maintaining a steady hand for clean edges.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, resulting in rough or melted edges. | Employ sharp, high-quality cutting blades designed for plastics to ensure clean, precise cuts. |
| Overheating the material during cutting, leading to deformation. | Use a moderate cutting speed and apply consistent pressure; consider coolant if prolonged cutting is required. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Custom Bushings and Bearings, Protective Coverings and Shields.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||