This high-grade brass stock sheet is engineered for superior performance in lubricating applications. Its precise dimensions and inherent material properties ensure reliable operation under strenuous conditions, minimizing friction and wear.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.087" |
| Length | 26" |
| Width | 31" |
Purpose-built for heavy-duty applications, this brass stock sheet exhibits excellent machinability and inherent self-lubricating characteristics, crucial for reducing wear in dynamic systems. The 0.087" thickness provides robust structural integrity, while the 26" length and 31" width offer ample material for custom fabrication. Its composition is optimized for low friction coefficients and extended service life, making it an ideal choice for bearing surfaces, bushings, and wear plates subjected to significant loads and sliding action. The material's corrosion resistance further enhances its suitability for diverse industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free from debris. 2. Precisely cut and shape the brass stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated component to its intended application, ensuring proper alignment and contact pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to premature wear. | Thoroughly clean all mating surfaces before installation to remove any contaminants. |
| Overtightening fasteners, causing deformation and increased friction. | Apply fasteners to the manufacturer's recommended torque specifications to avoid stressing the brass material. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty bushings, Wear plates in industrial machinery, Self-lubricating bearing surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||