This industrial-grade nylon stock sheet provides superior strength and wear resistance. Precisely manufactured to 0.080" thickness, it's ideal for custom fabrication of robust components and protective elements.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.080" |
| Length | 44" |
| Width | 27" |
Built to exacting engineering tolerances, this Nylon Stock Sheet boasts a precise thickness of 0.080 inches, a generous length of 44 inches, and a width of 27 inches. Constructed from high-performance Nylon, it exhibits exceptional tensile strength, superior abrasion resistance, and excellent impact toughness, making it suitable for applications demanding durability under stress. Its low coefficient of friction and good chemical resistance further enhance its utility in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean and prepare the substrate surface thoroughly. 2. Accurately cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the fabricated nylon component using mechanical fasteners or adhesives as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to edge fraying or inaccurate dimensions. | Employ sharp, industrial-grade cutting blades specifically designed for plastics or composites. |
| Insufficient surface preparation before bonding, resulting in poor adhesion. | Ensure the bonding surfaces are clean, dry, and free from contaminants like grease or dust. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Protective shielding, Custom gaskets and seals, Mechanical components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||