This high-quality carbon steel stock sheet, engineered for lubricating applications, offers excellent formability and durability. Its surface properties are optimized for reduced friction and enhanced wear resistance in demanding environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.079" |
| Length | 16" |
| Width | 33" |
Specified by design engineers worldwide, this 0.079" (2.01 mm) thick carbon steel stock sheet is manufactured to rigorous standards for consistent performance. Measuring 16" (406.4 mm) in length and 33" (838.2 mm) in width, it provides ample material for a variety of fabrication needs. The carbon steel composition offers a favorable balance of strength, machinability, and corrosion resistance, making it suitable for applications requiring controlled friction, such as bearing surfaces, sliding components, and specialized tooling. Its inherent lubricity is further enhanced by specific finishing processes, ensuring smooth operation and extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sheet thoroughly to remove any surface contaminants or oils. 2. Fabricate or cut the sheet to the required dimensions using appropriate industrial tooling. 3. Install the fabricated component in its intended application, ensuring proper fit and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation before installation. | Always degrease and clean the carbon steel surface before assembly or further processing to ensure optimal adhesion and performance. |
| Using incorrect cutting or forming tools, leading to material damage. | Employ sharp, appropriate tools designed for carbon steel to prevent burring, warping, or premature tool wear. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Anti-friction surfaces, Sliding components in machinery, Bearing race fabrication, Specialized industrial tooling, Lubricated guide rails.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||