This fabricating-grade brass stock sheet offers excellent formability and corrosion resistance. Its precise dimensions and consistent material properties make it suitable for a wide range of demanding industrial and artistic applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.077" |
| Length | 34" |
| Width | 43" |
Built to exacting engineering tolerances, this brass stock sheet boasts a precise thickness of 0.077 inches, a substantial length of 34 inches, and a width of 43 inches. Composed of a specific brass alloy (e.g., UNS C26000 cartridge brass), it exhibits superior machinability, excellent solderability, and good ductility, allowing for complex shaping without compromising structural integrity. This material is ideal for applications requiring good electrical conductivity and resistance to atmospheric corrosion, such as electrical components, decorative elements, heat exchangers, and musical instruments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the fabrication area is clean and well-lit. 2. Measure and mark precise cut lines on the brass sheet using appropriate marking tools. 3. Employ suitable cutting methods (e.g., shear, laser, waterjet) to achieve desired dimensions, maintaining edge quality. 4. Proceed with forming, joining, or finishing operations as per design requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to burrs or deformation. | Utilize high-quality cutting tools specifically designed for brass to ensure clean cuts and prevent material damage. |
| Inadequate support during bending or forming operations. | Provide proper support to the brass sheet during bending and forming to avoid unintended stress concentrations or buckling. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical connectors and components, Decorative metalwork and architectural elements, Heat exchanger tubing and fins, Musical instrument manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||