This premium brass stock sheet, measuring 0.076" thick, 39" in length, and 35" in width, is engineered for superior performance in critical measuring and inspection applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.076" |
| Length | 39" |
| Width | 35" |
A high-performance industrial component, this brass stock sheet boasts a precise thickness of 0.076 inches, a substantial length of 39 inches, and a width of 35 inches. Crafted from high-grade brass, it exhibits excellent machinability, superior corrosion resistance, and good thermal and electrical conductivity, making it ideal for precision tooling, calibration standards, and intricate component fabrication where dimensional accuracy and material integrity are paramount. Its non-magnetic properties further enhance its suitability for sensitive inspection environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and surface finish against project specifications. 2. Clean the sheet thoroughly to remove any manufacturing oils or debris using an appropriate industrial degreaser. 3. Position the brass sheet carefully to avoid scratching or deformation prior to its intended use.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull cutting tool when fabricating from the stock sheet. | Employ sharp, high-quality cutting tools designed for brass to ensure clean cuts and prevent material deformation. |
| Exposure to aggressive chemicals that can cause premature corrosion. | Store and handle the brass sheet away from strong acids or alkalis, and clean with mild, non-abrasive solutions. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision Measuring Tools, Calibration Standards, Instrument Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||