This high-quality brass stock sheet, specifically formulated for lubricating applications, offers excellent wear resistance and a low coefficient of friction. Its precise dimensions ensure seamless integration into critical machinery.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.075" |
| Length | 25" |
| Width | 23" |
Specified by design engineers worldwide, this brass stock sheet (0.075" thickness, 25" length, 23" width) is manufactured from a specialized alloy chosen for its inherent self-lubricating properties. The material exhibits superior machinability, allowing for intricate component fabrication. Its low friction coefficient makes it ideal for dynamic interfaces where reduced wear and heat generation are paramount, such as in bushings, bearings, and sliding mechanisms within automated systems and industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Precisely cut the brass stock sheet to the required dimensions for the component. 3. Securely fasten the fabricated component to its intended mounting location using appropriate fasteners and lubricants if necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys instead of specialized lubricating grades. | Always select brass alloys specifically designated for lubricating applications to ensure optimal friction and wear performance. |
| Improperly cleaning mating surfaces before installation. | Thoroughly clean both the brass component and its mating surface to prevent premature wear and ensure smooth operation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces in low-load applications, Bushings for rotating shafts, Wear plates in sliding mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||