This premium brass stock sheet, precisely 0.074" thick, 19" long, and 14" wide, is engineered for demanding abrading and polishing tasks. Its superior malleability and non-sparking properties make it ideal for intricate finishing.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.074" |
| Length | 19" |
| Width | 14" |
Manufactured under strict quality controls, this brass stock sheet boasts a nominal thickness of 0.074 inches (1.88 mm), a length of 19 inches (482.6 mm), and a width of 14 inches (355.6 mm). Composed of a high-purity brass alloy (typically UNS C26000 or equivalent), it offers excellent machinability, corrosion resistance, and ductility. Its workability allows for precise shaping and forming, crucial for fine-grit polishing and surface preparation in various industrial and artisanal settings. The inherent non-sparking nature of brass ensures safety in potentially hazardous environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface to be worked on is clean and free of debris. 2. Securely fasten the brass stock sheet to your work surface or jig. 3. Apply appropriate abrasive media or polishing compound to the brass surface as per application requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull or worn abrasive media with the brass sheet. | Regularly inspect and replace abrasive media to maintain optimal cutting and polishing efficiency. |
| Applying excessive heat during processing, leading to annealing and material softening. | Employ controlled heat application and consider coolant use to prevent unwanted annealing. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Surface finishing of delicate components, Creating custom abrasive pads, Polishing molds and dies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||