This high-quality lubricating brass stock sheet offers exceptional wear resistance and a low coefficient of friction. Ideal for applications requiring self-lubrication and reduced mechanical stress.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.073" |
| Length | 39" |
| Width | 36" |
Trusted by engineers across multiple sectors, this brass stock sheet (0.073" thickness, 39" length, 36" width) is manufactured from a specific alloy optimized for its inherent lubricating properties. Its machinability and corrosion resistance, coupled with a naturally low friction surface, make it suitable for bearing surfaces, bushings, and sliding components. This material minimizes the need for external lubricants, reducing maintenance and extending component lifespan in high-wear environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean and free of debris. 2. Precisely cut or machine the brass stock sheet to the required dimensions. 3. Securely fasten the component, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-machining, leading to reduced material thickness and compromised structural integrity. | Adhere to specified machining tolerances and avoid excessive material removal. |
| Improper cleaning of mating surfaces, causing premature wear. | Thoroughly clean both the brass component and its mating surface before installation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates, Bushings and sleeves, Sliding mechanisms, Gears and sprockets in low-load applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||